518-745-7699 (ROWW) [email protected]

WinTech Explorer 24



The WinTech Explorer 24 has a longer and narrower hull than the Explorer 21. The Explorer 24 is designed for speed. Higher bow and stern decks and the revolutionary WinTech Self-Bailing cockpit allow this boat to handle the rougher conditions of open water rowing. Angled saxboards give more lateral stability to help keep the boat set. An excellent choice for the rower who needs a bit of stability yet wants the performance of a racing single. 

If you like the Explorer 24 check out the WinTech Explorer 21 and the WinTech Explorer Double.

Chuck enjoying his new Wintech 24

SPECIFICATIONS:
Length: 24′ 6″
Beam: 14″
Hull Weight: 38 lbs for the Fiberglass Model C /  34 lbs for the Fiberglass/Carbon Model B
Capacity: 275 lbs

STANDARD FEATURES:
Three position anodized aluminum wing riggers with quick release
Height-adjustable carbon fiber seat
Removable fin
Rip-stop nylon boat cover
Footstretcher clogs with optional rowing shoes

Construction – Woven high temperature cured pre-preg Kevlar sandwich skin with 3mm Nomex Honeycomb core on hull and deck reinforced with unidirectional carbon fiber tape OR laminated single skin construction, with fiberglass exterior and kevlar interior, with additional carbon fiber reinforcement on gunwales and keep. Heat cured in mold. 
Fiberglass – Laminated single skin construction, fiberglass exterior and interior, with additional carbon fiber reinforcement on gunwales and keel. Heat cured in mold.
Carbon – Laminated single skin construction, fiberglass exterior and carbon interior, with additional carbon fiber reinforcement on gunwales and keel. Heat cured in mold.
Color – White with Red Deck Stripe – hand finished Epoxy paint

MODEL A – Full Core Hull – Sandwich construction boats are lighter and stiffer than their single-skin counterparts due to a honeycomb core, making them more suited to high performance use. Although still pretty resilient, a very stiff hull of this type of construction is a little more susceptible to damage from bangs and knocks.

MODEL  – B – Single Skin Hull – Single-skin construction boats tend to be hard-wearing with a little ‘give’ in the hull which helps absorb the odd knock in the boathouse or while being transported. They are a little heavier, but are ideal for novice crews and general club use where the boats are likely to take some general punishment, but still perform when needed.

Pricing for the WinTech Explorer 24 (Model A):

$6,400      WinTech 24 Hull
$   625      Dreher carbon fiber, adjustable handle, light-weight hatchet sculling oars
$7,025      Total boat purchase

 

Pricing for theWinTech Explorer 24 (Model B)

$5,400      WinTech 24 Hull
$   625      Dreher carbon fiber, adjustable handle, light-weight hatchet sculling oars
$6,025      Total boat purchase

Aluminum Quick Release Cam-Lock foil shaped rigger
Euro pin slot with 3 adjustment positions.

 

Hull Comparisons: WinTech 21/Racing Hull/WinTech 2x

Guaranteed Lowest Freight

Do you need a boat rack or slings for storing your boat, or a boat dolly to move your boat around on land?
Take a look at the our
Rowing Accessories Page!

Email Us!

Give us a call at 518-745-7699 (ROWW)